Frequently Asked Troubleshooting Questions

Offline Utilities

BACK TO FAQs

 

How does the observer change the system and/or plot colors?

 

Question: How does the observer change the system and/or plot colors?
 
Answer: The Application Utilities allows the user to look at the color setup being used with the system for tabular data and plots. The administrator and operator may change these profiles. The two options are System Color Setup and Plot Display Color Setup. (See Exhibits 6-7 and 6-8) Changing colors requires only to click the left mouse button on the desired color, a window appears, and then select the color you wish. .

NOTE: Each observer may change the system and plot colors. The change will not affect other users.

Parameter 1	On all plots - The far left parameter descriptor
Parameter 2	On all plots - The 2nd parameter descriptor from the left
Parameter 3	The 3rd parameter descriptor from the left or if only 2 parameters shown - It will be used for an overlay plot
Parameter 4	The 4th parameter descriptor from the left or if 3 parameters shown - It will be used for an overlay plot
Parameter 5	The 5th parameter descriptor from the left or if 4 parameters shown - It will be used for an overlay plot
Parameter 6	The 6th parameter descriptor from the left or if 5 parameters shown - It will be used for an overlay plot
Symbol Checked
Symbol Unchecked
Grid Lines	Horizontal or vertical grid lines

Exhibit 6-9 Parameter Description

NOTE: Changing the color of the grid lines will change both horizontal and vertical grid lines.

Reference: RRS User Guide Section 6.3